The valve can be mounted on the most easily accessible location on the implement. Depth control cartridge features an O-ring and back-ups on static seals and a urethane U-cup seal on the valve stem to give positive zero leakage and extended valve life.

Internal passages of the DCV valve connect the base of both cylinders. This prevents any torsional wind-up of the torque tube. Unequal settings of individual depth stop cylinders, a break in the line to a cylinder or a leak in one cylinder would normally result in the implement load being carried by one cylinder and torque tube. With the DCV valve, any leakage or breakage results in both cylinders moving in unison.

The Cross SVS series selector valves are 2-position, 3 port units designed for maximum performance at an economical price. These valves can be used for uni-directional cylinder and motor control or for selecting one of two circuits from a single pump.

The VS2 is rated to 20gpm and only offers a knob or clevis actuator. The VS4 is rated to 40gpm and can also use a handle, solenoid or air powered actuator. The VS4 also offers spring return and 2 position detent options.

A minimum of 100 psi pilot pressure is required for shifting the spool. With heavy duty end caps up to 3000 psi pilot pressure may be used. In some applications, pilot pressure can be supplied with a shuttle valve connected between ports “C” and “D” of the SD4 double selector.

The Cross SD5 hydraulic 2-wheel/4-wheel selector valve is a special version of the SD series valve with a special spool and body. It has been specifically designed for use with hydrostatic transmissions and permits selection of either 2-wheel (transport mode) or 4-wheel (work mode) drive positions.

The Cross SQV series valve is a 2-position, 3 port valve designed to alternately operate a pair of agricultural guide marker cylinders. It may be used with single acting or double acting marker cylinders.

The Cross BC series is a manually adjustable, pressure compensated, priority-type Flow Divider with pressure relief. It provides accurate speed and directional control of motors and cylinders or will operate two separate systems from one pump.

At Haverstick Bros., we can build most configurations of the Cross BA valve in our shop. We have the tools and expertise to build, modify and test all Cross products.

Cross products are proudly manufactured in the USA!

The Cross C series is a rugged and dependable low-cost valve. It operates at 30gpm, but only 2,500 psi (compared to 3,000 psi for the BA valves). It is a series type and is recommended for all general purpose applications. It does not have integral load holding check valves and should not be used to lift heavy loads in a vertical position. It will operate a double-acting cylinder or a bi-directional motor required to hold a load in neutral. The C series does not have a power beyond available and is generally not customizable after it?s built. All options need to be ordered from the factory.

Cross products are proudly manufactured in the USA!

The Cross Converta can be easily converted to a 3-way valve by using the conversion and port pipe plug supplied with the valve. It can also be converted to a 3-position manual detent valve by ordering a separate detent kit: part #1V0294.

This valve may be used to operate a double or single acting cylinder, or a reversible or single direction motor when a hold position in neutral is required.

Cross products are proudly manufactured in the USA!

The Cross DV series directional control hydraulic valve, designed for loaders, offers extremely low leakage with outstanding load-holding capability in a compact, space saving model. All ports come out the same surface of the valve and it will fit in a space less than 6 inches wide. Float and regen capabilities, load checks, built-in power beyond and single handle actuator (or standard handles) make this valve ideally suited for the mobile hydraulic loader market.

Cross products are proudly manufactured in the USA!